Law Enforcement Optic cuts
1
2
3
1
Precision milled pockets for Trijicon, Holosun, Leupold and more
2
Iron sights available for absolute, or lower 1/3 co-witness
3
Badass Blue Line Customization not included… but possible
Instead of trading in your current Glock Pistols for a $300 loss and then spending even more money on new M.O.S. Enabled pistols bring them in or send them to us for a precision optic cut and complete refinishing of the pistol slide in single color cerakote.
$75.00 per slide for small batch agency contracts (5+ at a time) | $100.00 for individual officers on a duty or personal firearm
Our precision fit optic cuts make your optics last longer, return to zero better during yearly battery swaps and are a better ‘hard use’ solution for a duty pistol than modular mounting plates. M.O.S. plates put all the recoil energy from the slide into the screws that attach your optic to the plate leading in many cases to a failure of one or more screws or the failure of the plates (cracking) as well. All that energy needs to go somewhere and when it is concentrated on two small screws and a plate they often do not stand up to the abuse. Precision optic cut pockets cut into a slide enable a smoother transfer of recoil energy from the bosses and the front radius into the entire optic body and behave more like the optic and slide are one piece vs attached to each other.
Cerakote is the world’s leading thin film firearm coating for a reason, there is no coating on the planet that holds up better to rust and corrosion, abrasion, hardness and flexibility. We have Cerakote coatings that rival the coefficient of friction found in Teflon but with much better abrasiona nd corrosion resistance. We are Utah’s only Advanced Cerakote Certified Applicator and each slide is quality controlled for coating thickness spec and quality spec to ensure that your duty firearms have the best protection out there.
Optic cut and single color cerakote for Law Enforcement professionals and agencies enjoy an expedited lead time in many cases as soon as 24 hours when an appointment is set.
Please call us for any nessecary information, we love the opportunity to be on the shooting range demonstrating our products to any interested agencies.
AR-15s Purpose Built for the Job
IN JULY 2018 WE SET OUT TO CREATE THE ULTIMATE SMALL RUN PRODUCTION AR-15. LOOKING AROUND AT WHAT UTAH LAW ENFORCEMENT HAD AVAILABLE TO THEM AND AT THE PRICES THEY WERE BEING CHARGED WE SAW A SERIOUS OPPORTUNITY TO BACK OUR LOCAL MEN AND WOMEN IN BLUE AND OFFER MUCH HIGHER QUALITY, FULLY AMBI-ENABLED, PRECISION GAS GUNS, FOR THE DESIGNATED MARKSMAN, PATROL OFFICER AND SWAT OPERATOR, AT A PRICE THAT EVEN THE CHEIF WILL BE PROUD TO PRESENT TO THE BUDGET OVERSIGHT COMMITTEE.
Culper Precision DM Series Rifles:
Manufactured, Cerakoted, Assembled and tested In-house in Provo, UT
MILSPEC+ Machine Fit upper and Lower -No set scews, no wedges, no rattle.
MILSPEC+ Trued and squared Upper, Midwest Industries Handguard
MILSPEC+ Hansen Profile Ballistic Advantage Barrel – Tuned Gas System
MILSPEC+ Proprietary Accurization process for aggresively Sub MOA Accuracy
MILSPEC+ Ambi Safety Selector and Charging handle, Qick Detach Endplate comes standard
MILSPEC+ Anti-walk Trigger Pins
MILSPEC+ ALG Advanced Combat Trigger
MILSPEC+ DLC Coated BCG for one-wipe cleaning
Sights Included
B5 Systems Stock, Staked Castle Nut
Engrave your Shoulder Patch/Badge into Magwell for single $100 fee that applies to all future rifles
Available in 11.5, 14.5” Mid , 16 Mid” Barrel or built to your spec.
Upgrades and Customization Available to suit your Mission.
For a list of refrences of agencies currently running our AR-15s, please reach out to us via email and we will happily give you the list of Law Enforcement agencies that have ben running our guns so you can hear about us directly from your peers.
1
2
3
4
5
6
7
8
1
Pinned Gas Block
2
Precision Trued and squared upper receiver
3
DLC Coated Bolt Carrier Group
4
Agency Badge or shoulder patch engraving on the magwell
5
30 round magazine
6
MILSPEC+ Trigger, tuned for crisp break while maintaining policy weight
7
AMBI safety selector Standard
8
AMBI Charging handle standard
1
2
3
4
5
6
7
8
1
Premium 1:7 twist barrel
2
1911 style pistol grip
3
Enhanced trigger guard for gloved operation
4
Precision machine fit upper and lower – no wiggle
5
Press-fit barrel
6
MLOK Handguard, 10.5″ | 12.625″ | 14″
7
Tuned and optimized gas system
8
Anti-walk Trigger pins
1
2
3
4
5
1
Full Action Blueprint and True
2
Choose Bartelein 5R Stainless steel barrel or Douglas Stainless barrel any length up to 22″
3
Any Single Color Cerakote on barreled action
4
Full glass bedding of action and chamber
5
New stocks and chassis also available
Instead of getting rid of a sniper system with a shot out barrel, we will re-barrel with a brand new precision blank. Choose from Bartelein 5R or Douglas Blank
$850.00 for re-barrel with Bartelein 1:10 5R Stainless steel blank
$775.00 for re-barrel with Douglas 1:10 standard rifling Stainless steel blank
All Law Enforcement re-barrels include;
- full blueprint service for Remington 700 action.
- tenon threads opened up to 1 1/16″ +.010″ with .0002″-.0005″ concentricity with the bore of the action.
- True lug seats inside action perpendicular to bore.
- lap bolt lugs to new lug seats.
- choke up bolt handle when necessary.
- Square bolt face to perpendicular with action bore.
- precision chamber and tenon barrel blank .002″-.003″ over go gauge.
- Benchrest style 11 degree muzzle crown.
- 5/8×24 thread on muzzle .0005″ concentric to the bore.
- thread time suppressor or muzzle brake for perfect concentricity.
- full glass bedding of action and chamber.
- single color Cerakote on barreled action.